Distributors of Quality Hardwoods & Building Products

-

Home

Company

Products

Locations

Technical

Contact

Login

 

Forest and Lumber  |  Millwork and Moulding  |  Plywood  |  Veneer  |  Other

Technical

Forest & Lumber

Millwork & Moulding

Plywood

ANSI Plywood Grades

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Veneer

Other

 

Technical Section

(Page 2 of 8)

 

ANSI Plywood Grades

 
Ash, Birch, Maple and Poplar

Summary of Hardwood Face Grade Characteristics

Cut

Plain-Sliced (Flat-Cut), Quarter-Cut, Rotary Cut

Grade Description

A B C D E

Color and Matching

Sap

Heart

Nat.

Sap

Heart

Nat.

 

Sapwood

Yes No Yes Yes No Yes Yes Yes Yes

Heartwood

No Yes Yes No Yes Yes Yes Yes Yes

Color Streaks

Slight Yes Yes Yes Yes Yes

Color Variation

Slight Yes Yes Yes Yes Yes

Sharp Color Contrast at Joints

No No Yes Yes Yes

Type of Matching

Book Matched

Slip Matched

Pleasing Matched

 

Yes
Specify
--

 

Specify
Specify
Yes

 

--
--
--

 

--
--
--

 

--
--
--

Nominal Minimum

Plain-S.

Width of Face

Quarter

Components

Rotary
5 in.
3 in.
5 in.
3 in.
3 in.
4 in.
No Limit No Limit No Limit

Natural Characteristics

Small Conspicuous Burls & Pin

Knots-Combined Avg. Number

1 per 3 sqr ft

10 per 4' x 8' panel

1 per 2 sqr ft

16 per 4' x 8' panel

No Limit No Limit No Limit

Conspicuous Burls - Max. Size

3/8 in. 1/2 in No Limit No Limit No Limit

Conspicuous Pin Knots

Avg. Number

Max. Size: Dark Part

Total

1 per 8 sq ft

4 per 4' x 8' panel
1/8 in.
1/4 in.

1 per 4 sq ft

8 per 4' x 8' panel
1/8 in.
1/4 in.
No Limit No Limit No Limit

Scattered Sound and Repaired Knots - Combined Avg. Number

Max Size - Sound

Max Size - Repaired

Avg. No. - Repaired

No
1 per 8 sq ft

4 per 4' x 8' panel

3/8 in.
1/8 in.
1 per 8 sq ft
1per 4sq ft

8 per 4' x 8' panel

1/2 in.
1/2 in.
1per 8sq ft
1per 3sq ft

10 per 4' x 8' panel

1 in.
3/4 in.
1per 6sq ft

No Limit

1-1/2 in.
1 in.
1per 2sq ft

Mineral Streaks

Slight Slight Yes Yes Yes

Bark Pockets

No Few to 1/8" x 1" Few to 1/4" x 2" 1/4" x 2" Yes

Worm Tracks

Slight Slight; Ash, Yes Yes Yes Yes

Vine Marks

Slight Slight Yes Yes Yes

Cross Bars

Slight Yes Yes Yes Yes

Manufacturing Characteristics

Rough Cut/Ruptured Grain

No Slight Two 8 in. diameter areas or equivalent 5% of panel 10% of panel

Blended Repaired
Tapering

Two
1/16" x 6"
Four
1/8" x 8"
Four
3/16" x 8"
Six
1/4" x 10"
Yes

Repairs

Small Blending Blending Yes Yes Yes

Special Characteristics

--

-- -- -- -- --

All wormholes, open splits, open joints and open bark pockets must be filled.  Doze is not allowed.

The AA Grade is available as a custom order.

Spliced Veneers (Available in all Grades)

Whole Piece Veneers (Available in all Grades of Rotary Veneer)

ANSI/HPVA HP-1-2000
 

© 2005 Hogan Hardwoods & Mouldings. All rights reserved  | 1-800-255-5460